EPM-VID-3 - Versalogic EPM-VID-3 - SVGA Module for the PC/104-Plus Bus Simple...
- Part Number:
- EPM-VID-3
- Model Number:
- EPM-VID-3
- Make:
- VERSALOGIC
- Lead Time:
- Available
- Qty In Stock:
- Available
Versalogic EPM-VID-3 - SVGA Module for the PC/104-Plus Bus Simple Type: Expansion Module
The EPM-VID-3 is a PC/104-Plus video expansion module for PC/104-Plus, EPIC, and EBX systems. It provides video output to flat panel, CRT, and composite video displays. It can be used as a primary or secondary video output device or as a temporary video device during system development and testing. The standard module provides connectors for LVDS, CRT and TV outputs. Custom versions are available with TTL flat panel outputs. Up to three simultaneous outputs are available, with driver support for two independent displays. CRT and TV outputs are automatically detected and configured through the video driver. This PC/104-Plus module can be used to expand any PC/104-Plus compatible system. Additional PC/104-Plus or PC/104 modules can be stacked above the EPM-VID-3 module.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 16.7 Million displayable colors
- 8 MB video RAM
- ATi Rage Mobility video chip
- LVDS, CRT and TV out
- PC/104-Plus form factor
Specifications
- Board Size: 3.55” x 3.775”
- Compatibility: PC/104: pass-through
- Graphic Accelerator: ATi Rage Mobility M1
- Humidity: Less than 95%, noncondensing
- Jumper-selectable settings for the following flat panel configuration: 800 x 600 18-bit LVDS. 1024 x 768 18-bit LVDS. 800 x 600 24-bit LVDS. 1024 x 768 24-bit LVDS.
- LVDS Flat Panel Interface: 18/24 bit, 1024 x 768 max. resolution. 20-pin molex connector.
- Memory Video RAM: 8 MB
- Operating Temperature: 0° to +60°C
- PC/104-Plus: full compliance
- Power Requirements: +5V ±5% @475 ma
- Software: Operating Systems Software compatible with Win95/98/NT/CE/XP, Linux, QNX Neutrino, and Wind River VxWorks.
- Storage Temperature: -40° to +85°C
- TTL Flat Panel Interface: 18/24 bit, 1280 x 1024 max. resolution. Requires custom VBIOS and jumper settings, and the addition of a 44-pin TTL FPD connector.
- TV-Out (Composite Video) Interface: 1024 x 768 max. resolution (scaled to NTSC). 2 mm 10-pin latching header.
- Video: Desktop (CRT) Display Interface 18/24 bit, 1600 x 1200 max. resolution. 2 mm 12-pin latching header with CRT detect pins.
- Video BIOS: Reprogrammable, VESA-compatible BIOS with four 64K areas (3 pre-programmed; one customizable).
Applications
- None Available
Aliases
- None Available